Four ways to choose a diamond saw blade!

The quality of a diamond saw blade directly impacts overall processing efficiency. Since the cutting edges inevitably wear and consume during use, it's crucial to pay close attention to cutting ability, service life, and overall performance to select a high-quality blade. So how do you choose a high-quality saw blade? You can start with the following aspects.

Pay attention to the position of the cutting edges

Check if the cutting edges are aligned on the same line. Misalignment usually results from irregular cutting edge sizes. This will lead to unstable processing during cutting and affect the saw blade quality.

Pay attention to the weld position

When purchasing a diamond saw blade, pay attention to the weld. Ensure the weld is strong and tight. A weld seam is usually present after welding; there should be no gaps. Only then is the saw blade quality truly guaranteed. Gaps indicate that the cutting edges haven't fused with the substrate, resulting in uneven grinding of the cutting edge base.

Pay attention to the saw blade weight

Generally, a thicker saw blade is better. A heavier saw blade has greater cutting inertia, ensuring smoother cutting. Therefore, it's important to measure the saw blade weight, ensuring it falls within the standard range to guarantee the cutting effect.

Pay attention to the substrate hardness

A diamond saw blade with high substrate hardness is less prone to deformation during use. The substrate hardness directly affects the saw blade quality during welding and cutting. To ensure no deformation during high-temperature welding and subsequent cutting, the substrate quality must be guaranteed.